FEULING oil pump pressure test tool for Feuling M8 oil pumps, ONLY fits FEULING oil pumps, does not fit factory HD oil pumps.
Bench test the FEULING Milwaukee Eight oil pumps, cycle the pressure relief valve, testing operation and assuring the valve moves freely, seats and seals each time, any leakage at the relief valve will reduce oil pressure.
FEULING oil pump pressure test tool for Feuling M8 oil pumps, ONLY fits FEULING oil pumps, does not fit factory HD oil pumps.
This tool allows the engine builder to know what PSI the relief valve opens; the spring tension can be adjusted to achieve the desired pop off PSI. Tool includes: air regulator, 0 - 100 psi pressure gauge, plugs for water and oil cooled oil pumps, gasket & needed hardware. Feuling recommends the oil pump relief valve be seated and sealed from 0-30 psi with full pop off at 50-60 psi. Made in the U.S.A.
Proper relief valve seal will insure good hot idle oil psi and reduce oiling system cavitation and related pressure issues.
Fits Feuling oil and center/water cooled oil pumps 7018, 7019, 7020, 7021
Does not fit Factory HD oil pumps
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.
Fitment Disclosure
This quick reference fitment information is provided to direct you to our catalog information and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.
General Safety Warning
Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, LeMans Corporation accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email someemail@website.com
